Last Updated on September 7, 2021 by Leepu Da Maxim
What is Solvent cleaners?
Solvent cleaner removes oil and grease from the surface of your car with the help of a solvent. It also cleans and deodorizes surfaces inside and outside your vehicle. Solvent cleaning is a method in which regular household cleaners are used to remove dirt, grease, scum, or other solids from a hard surface or material like Car Tires.
Some Solvent Cleaners:
- SDS solvent cleaner – removes paint, ink, rust from steel surfaces
- DILUENT thinner – dissolves old wax from metal surfaces
- DAILY cleaner – removes paint, ink, rust from steel surfaces
- HEAVY duty cleaner – removes paint, ink, rust from metal surfaces
What Are Oils Cleaning Agent For car?
Oil is a type of fluid that is used to lubricate both the moving parts in an engine and other moving parts such as bearings, gears, chain sprockets, etc. It also serves as a heat-transfer fluid when it is used for cooling purposes. When oil leaks out of an engine it can result in damage to other areas including the paint finish on your vehicle’s body.
Oil- And Solvent-Based Products Explained in Detail
Here, you will not only find the same category in oil- and solvent-based car products. However, these types of products usually offer a result with higher durability compared to water-based products. Even when a driver goes through an area with dirty rainwater the protection of these products is additional. We can mention two main categories.
1. Petroleum-Based Products
Petroleum-based products are among the most common when it comes to finding a product for the vehicle. Especially, tire polishes often have a petroleum base as it is necessary to incorporate a set of strong and important chemicals. When this option is applied incorrectly, certain damage can easily appear on the tire.
Damage can occur on painted surfaces as well as the tire surface. The incorrect application allows the harsh chemicals included in this product to start working immediately. Even more frequent damage can be found in all those spray foam products that are too cheap.
In turn, many of these options are often flammable which makes them truly dangerous cans. These options are often chosen by vehicle owners who do not want to spend a fortune on these products. However, these people get exactly what they are paying for, i.e. a very low-quality product.
2. Silicone-Based Products
One of the most recommended options when it comes to implementing a good layer of protection to tires is silicone-based products. Here, a protective layer of excellent quality and performance is obtained when the product includes silicon. Even after the vehicle and tires have been thoroughly washed, this protective layer remains in place.
Thus, the protective layer cannot be removed as easily as with other products. In this way, the shine that the tires can obtain is much more durable in the different environments that the driver has to go through. In this case, it is possible to find products that include a silicone base together with a water base.
Here, a petroleum base is not required to make up the formula of these products. However, other options contain petroleum solvents when it comes to a solvent-based product. Each of these options may offer a different result. Either way, in no case, are tires harmed if each of these products is applied correctly.
3. Reasons For Tire Deterioration
In most cases, tires begin to deteriorate due to a wide variety of factors. However, a tire polish is usually not one of those factors when applied correctly. Tires are brown when the antiozonant substance reaches the surface. This layer is deep in the tire and approaches the surface as the service life progresses.
However, this is a problem that can be solved simply with a few washes and specific products. Therefore, it is not a very serious problem that implies the replacement of the tires. However, as we have mentioned, this happens when the tire is reaching its full-service life. So, it might take a little while to replace all four tires.
On many occasions, the tire may contain trapped dirt and that is what generates the brown appearance. So, this can easily occur when the vehicle is not driven frequently and proper cleaning is not applied. When a silicone-based product is dry, dirt and dust can easily adhere.
This can create a very sticky surface that allows dust and dirt to adhere without too much effort. Here, proper cleaning should be applied to the tires every reasonable amount of time. Some people may also decide to implement a water-based dressing when dealing with a very dusty area.
Some examples of solvent cleaners are:
2. Boeshield T-9
3. Liquid Wrench
4. PB Blaster
6. Corrosion X-43 Intensive Penetrating Oil
8. ZDDP Gold Synthetic Lubricant for Automotive Applications
9. Lucas 10W30 Motor Oil – High Viscosity/Low Sulfur Blend – API SM/CFM/SL/CFZ10W30Z0SZ1204
10. Amsoil 20W50 High Performance Heavy Duty Motor Oil – API SN/CF, ACEA C3, ACEA E9.